AAS-R101-1CH 1 Channel Digital Remote Control Receiver for Sliding Doors

Product code: 25808

AAS-R101-1CH 1 Channel Digital Remote Control Receiver for Sliding Doors. DC 12V REMOTE CONTROL SWITCH with plastic HOUSING Rolling code with latch function Momentary & Toggle Operates with the control with code: AAS-T100-2CH The control is not included.

Wisdom Price: 17.00€

Not available

By buying this product you earn 14 Points

Not available

Company product: AASYSTEMS

COMPANY

specifications Character:

Operating voltage: DC12V
Quiet consumption: ≤10mA
Operating frequency: 433MHz
Receiver sensitivity: -98dB
Operating mode: Momentary, Toggle, Latching
Coding: Rolling code
Output: 1 NO / NC relay
Operating temperature: -30 ~ 80

Wiring:
1 = +12V
2 = -12V
3 = NO open output Relay
4 = COM common contact Relay
5 = NC closed output Relay

Mode:
1. Setting up to Momentary output: No Jumper connection
2. Set to Toggle output: Jumper connection between Tout & middle pin
3. Setting up to Latching output: Jumper connection between Lout & middle pin

Learning:
1. Press the “LEARN” button, the LED is flashing.
2. Press the remote control button, the LED indicator flashes quickly.
3. The learning was successful.

Delete remote control ：
1. Press the “LEARN” button 5 times.
2. The indicator light flashes after about 2 seconds.
3. All remote controls were deleted successfully.

Operating modes ：
1. Toggle: Press the A button once, the relay contact will close, press
button A again, the relay contact will open.
2. Latching: Press button A once, the relay contact will close, press
button B, the relay contact will open.
3. Momentary:: Press and hold the A button, the relay contact will
closed, release button A, the relay contact will open.