specifications
Character:
- Operating voltage: DC12V
- Quiet consumption: ≤10mA
- Operating frequency: 433MHz
- Receiver sensitivity: -98dB
- Operating mode: Momentary, Toggle, Latching
- Coding: Rolling code
- Output: 1 NO / NC relay
- Operating temperature: -30 ~ 80
Wiring:1 = +12V
2 = -12V
3 = NO open output Relay
4 = COM common contact Relay
5 = NC closed output Relay
Mode:1. Setting up to Momentary output: No Jumper connection
2. Set to Toggle output: Jumper connection between Tout & middle pin
3. Setting up to Latching output: Jumper connection between Lout & middle pin
Learning:1. Press the “LEARN” button, the LED is flashing.
2. Press the remote control button, the LED indicator flashes quickly.
3. The learning was successful.
Delete remote control :1. Press the “LEARN” button 5 times.
2. The indicator light flashes after about 2 seconds.
3. All remote controls were deleted successfully.
Operating modes :1. Toggle: Press the A button once, the relay contact will close, press
button A again, the relay contact will open.
2. Latching: Press button A once, the relay contact will close, press
button B, the relay contact will open.
3. Momentary:: Press and hold the A button, the relay contact will
closed, release button A, the relay contact will open.