specifications
Technical characteristics of LEMCO HDMOD-5S:
Log in
- Type: 1 x HDMI in & 1 x HDMI out
- HDMI loop-through: Yes
- Connection: 1x HDMI Type A
- Video coding: MPEG-4 AVC / H.264
- Profile: High profile 4.0
- Resolution: 1920x1080-30p HDMI input
- HDCP support: Yes
- Audio: HDMI
- Audio encoding: MPEG2, ACC, AC3
- Standard: MPEG-1 Layer II
- Audio Bit Rate: 64, 96, 128, 192, 256, 320, 384 kbps
- Level: 0.5Vpp to 1.0Vpp adjustable
H.264 Encoder
- Standard: MPEG-4 AVC / H.264
- Bit Rate: 1 –19Mb / s adjustable
- Customizable parameters: Service Name, Service ID, Video PID, Audio PID, PMT PID
Transport Stream editing
- Automatic regeneration: NIT, PAT, CAT, SDT, PMTs, EITs tables
- Configurable parameters: TS ID, Original Network ID, Network ID, Provider Name
- LCN support: Yes
- LCN Providers: Nordig, ITC / UK, EICTA / Europe, New Zealand
DVB-T output
- Standard: EN300 744
- Bandwidth: 5,6,7,8 MHz
- Modes: 2K, 8K
- Constellation: QPSK, 16QAM, 64QAM
- Guard interval: 1/4, 1/8, 1/16, 1/32
- Code rate: 1/2, 2/3, 3/4, 5/6, 7/8
RF output
- Type: RF DVB-T (COFDM)
- Output frequencies: 174 ... 230MHz & 470 ... 862MHz
- Output level: 85dbμV max.
- Connection: 75Ω -F, female
- Output attenuator: 0, -10, -20 dB
- MER: 35dB (Typical)
- Shoulder attenuation:> 45dBc
- RF out Connectors: 1 x F -female, 75 Ohm
- RF (loop through): 1 x F-female, 75 Ohm
IR Transmitter (Transmitter)
- Coax download frequency: 10,7 MHz
- Loop frequency range: 5 ~ 862 MHz
- Configuration type: ASK
- Input loss: <1 dB
IR transmitter cable (Emmiter)
- IR frequency range: 30 to 60 KHz
- IR Wavelength: 940 nm
- IR distance: 15 ~ 20 cm
- Length: 1 meter
- Plug type: 3,5 mm mono mini Jack
Programming interface
- Via Bluetooth
- Version 4.0 and above is required
- ETSI EN 300 328 and EN 300 440 Class 2 (Europe), FCC CFR47 Part 15 (US) and ARIB STD-T66 (Japan)
Platform support:
- Androidversion 5.1 and up, iOS version: 9.3 or later, iPhone 4s or later, iPad 3rd Gen or later
General information
- Power supply: + 12VDC (included)
- Power consumption: 290 mA max.
- Operating temperature: 0 έωςC to 50 ºC
- Storage temperature: -10 έωςC to +70 .C
- Humidity: Up to 90%
- Dimensions: 198.0 x 100 x 26.4 mm (mounting slots)
- Weight: 0.25Kg
* The LEMCO IR Receiver LRI-107-38 receives the infrared signals from your remote control to the room and sends them via your home RF coaxial wiring to the IR Transmitter suitable for use with its HDMOD-5S and HDMOD-5F modulators LEMCO. (Sold separately).