CTK Anticorrosive Soundproofing Mastic

The paste should be applied with a brush on a dry, cleaned surface from dirt and rust. If necessary, it can be diluted with solvent before use. After drying, it creates a durable, flexible and absorbent protective layer that is resistant to mechanical stress (for example, impact from stones, gravel, etc.) and weather conditions. Due to its strong penetrating properties and odor, the agent is not recommended to be used in the car, for example, for damping upholstery elements or door panels (may penetrate or leak through gaps and be strongly absorbed by the upholstery material. ).

Mix the contents of the container well before use. If desired, it can be diluted with solvents. Its most remarkable effect may be the suppression of road noise entering the car from the wheel belt obtained by applying Defender paste (layer thickness of at least 2 mm). To be applied to vibration damping materials characterized by the highest level of vibration reduction (for example, CTK Dominator 3-4mm, STK Premium 3-4mm). In addition, two types of soundproofing materials should be used for plastic fins, for example: CTK Premium mattresses 2,2-3,0 mm + waterproof noise insulation foam or, alternatively, a thicker layer of CTK Defender paste in the case of soft textile wheel covers, the which cannot be covered with butyl layers. Thus, it is possible to achieve a reduction in road noise at the bottom of the cab by approximately 1,5-2,5 dB, depending on the car model, quantity, thickness and type of materials used, as well as the effect of other components of the body on the entry of noise into the car.

Where to use it:

• doors 
• Wheel arches

Character:

• Weight 2Kg