One of the most effective high quality sound absorbing materials. There are only a few products with comparable properties offered by well-known manufacturers at much higher prices. CTK WaveFix is ​​a sticker, very flexible, very soft and sensitive, that absorbs sound based on special polyurethane with "memoryfoam". It is characterized by a very high ability to absorb sound (and noise) in the medium and high frequency range as well as for its extremely good thermal insulation properties. The sound-absorbing treatment further improves the acoustic properties, protects against the absorption of moisture from the air, the growth of microorganisms, mold and bacteria, and also protects the underlying material from aging.

CTK WaveFix foams have a porous structure with a combination of half-open and partially closed cells with high density and various sizes. WaveFix can be installed in different places, as they have basic properties of both soundproofing materials and sound absorbers. The Wave-panel (corrugated) additionally increases the active absorbent surface, which results in significantly higher sound absorption compared to standard flat surface materials. The foam is also characterized by the so-called "shapefoam" effect, ie it slowly returns to its original shape after intense compression. It expands easily and with a little effort, it fills the gaps and the free space between two adjacent panels, the car's sheet metal and the upholstery, without the risk of deformation and disengagement.

CTK WaveFix provides several times higher sound absorption than other standard mufflers of similar thickness. It works most efficiently in a frequency range above 500 Hz, but the noise reduction starts at around 100 Hz. This means that if the goal is effective and obvious car silencing, this material is essential for any professional installation. Due to its very soft elasticity and its ability to slowly fill in the gaps and free space between two elements, CTK WaveFix sound-absorbing foams are also ideal as a material for reducing cracks, breaks and tuning of plastic panels. and car upholstery (for example, door panels, roof and cab trim, tunnel center console, columns, hood lining, etc.), which act as shock-absorbing pads between two vibrating surfaces, for example, between the chassis and the interior door. This material can also be used for soundproofing industrial appliances, machines and spaces, as well as for damping the interior of speakers and subwoofers.

Thanks to its very soft and flexible structure, CTK WaveFix is ​​very easy to install on flat and uneven surfaces, even with a very intricate shape. They are designed for use in the car, mainly behind plastic panels, wallpapers, roof coverings, dashboard, as well as on the trunk, wheel and wing surfaces of the wheels, as a very effective material that absorbs road noise.